This video will walk you through the basics of installing a Minn Kota Ultrex trolling motor. *This video is meant to be a supplement to the official trolling motor installation instructions and precautions. Please refer to those instructions for complete steps. (See Links Below
Key Moments
- 0:00 - Introduction, Tools Needed & Manual
- 1:30 - Mounting the Motor Assembly to the Motor Base (Mono Arm)
- 5:15 - Mounting the Trolling Motor to the Bow
- 10:34 - Installing Lift Assist Cylinder
- 12:16 - Installing the Prop
- 13:29 - Mounting the Stabilizer Bar
- 16:30 - Cable Management
- 19:16 - Wiring the Trolling Motor
- 23:16 - Installing the Heading Sensor
- 28:15 - Pairing the Heading Sensor
- 29:08 - Connecting i-Pilot Link and Sonar
- 33:16 - Closing
